Categories
Contact Us

Office Mob: +8618002480485

Office Tel: +86-024-31140175

Office Fax: +86-024-22845391

E-mail: info@eoexport.com

Knowledge
Home > Knowledge > Content
Cable insulation cover local defect repair tips
May 10, 2018

Use a knife to cut the slope of the plastic layer at a 45-degree angle to a plastic block or strip of the same shape, color, and thickness. After fixing it with a pliers or a screwdriver, use a hot air speed welding gun and then use copper foil to compact it. , Compaction, flattening, and finally spark test, no breakdown is qualified.


The plastic defect is scraped with a knife, and the recessed part is filled with the same plastic strip under the action of a hot wind plastic welding torch, then flattened, pressed and compacted with a copper piece at the defect repairing place, and the spark test is performed without breakdown. Qualified.


  • Newsletter
  • Categories
  • Contact Us

    Office Mob: +8618002480485

    Office Tel: +86-024-31140175

    Office Fax: +86-024-22845391

    E-mail: info@eoexport.com

  • QR Code
  • Copyright © Liaoning EO Technology Co.,Ltd All Rights Reserved.