Office Mob: +8615524105871
Office Tel: +86-024-31931990
Office Fax: +86-024-22845391
Overhead Service Drop Cable is designed for use to supply 120 volt aerial service for temporary service at construction sites, outdoor or street lighting. For service at 600 volts or lower at a conductor temperature of 75°C maximum....Send Inquiry
Overhead Service Drop Cables Used to supply power, usually from a pole-mounted transformer, to the user's service head where connection to the service entrance cable is made. To be used at voltages of 600 volts phase-to-phase or less and at conductor temperatures not to exceed 75°C for polyethylene insulated conductors or 90°C for crosslinked polyethylene (XLP) insulated conductors.
Specifications of Overhead Service Drop Cable:
●Meets or exceeds the following ASTM specifications:
●B-1 Hard-Drawn Copper Wire.
●B-3 Soft or Annealed Copper Wire.
●B-8 Concentric-Lay-Stranded Copper Conductors, Hard, Medium-Hard, or Soft.
●Meets or exceeds all applicable requirements of ANSI/ICEA S-76-474 for polyethylene and crosslinked polyethylene insulated conductors.
Construction of Overhead Service Drop Cable:
●Conductors are concentrically stranded compressed soft copper insulated with either crosslinked polyethylene, or conventional polyethylene.
●Neutral messengers are either solid or concentrically stranded bare hard-drawn copper.
Production flow of Overhead Service Drop Cable
1.What is your delivery date?
A:The delivery date is about 5-7 days after receipt of payment.
2.What are your payment terms?
A:30% deposit in advance and 70% balance before shipment.
3.Can you send free samples?
A:Yes, free samples are available; you just need to pay the shipping cost.
Our usual packaging ways for Overhead Service Drop Cable are as followings, OR it can be as customer's request.
Next: No Information